User Manual（TOMI3-PLUS）

Thank you for choosing

TOMI3-PLUS

Intelligent wireless charging device

Product Overview

This product is specially designed for motorcycles to carry mobile phones and charge mobile phones at the same time. It is suitable for direct installation and use of multiple BMW original navigation power seat models; After matching with other optional TOMISHIRO installation components, it can be used for more models installation and use (please consult TOMISHIRO brand kits for understanding).
This product has waterproof design and is suitable for all-weather outdoor use. The waterproof level is IP65, and can be directly cleaned with high-pressure water gun (please make sure that the USB waterproof plug is fully covered before cleaning).
This product is compatible with most smart tablet phones, solving the power endurance problem of users using mobile navigation during long-distance travel.

Product Features

The product housing is made of ABS + PC material, and other internal and external components include weather resistant rubber, silicone, nylon materials, etc., manufactured to meet outdoor use standards. The equipment has passed exposure, rain, high temperature + 70 degrees Celsius, low temperature - 40 degrees Celsius and other environmental tests, meeting the requirements of usability and reliability of equipment under extreme outdoor conditions.
It is fully compatible with BMW original navigation power socket for use; with TOMISHIRO installation kit, it can be adapted to more car models for installation and use.
Gold-plated back connectors can ensure reliable and stable power performance.
Multiple circuit protection functions, circuit characteristics can provide foreign body detection, overvoltage protection, overcurrent protection, overheat protection, mobile phone full protection, etc.
It can provide efficient 15W wireless charging power, and wireless charging can still ensure that the phone battery stays full of electricity even when the phone is completely lit and navigating.
Intelligent charging function, microcontroller unit (MCU) can dynamically adjust the charging current, when the phone's power is low can be full power fast charging, and according to the phone discharge situation intelligent adjustment of output current; when the phone's power is about to be full, adjust to trickle charging state (low current); when the phone is full, automatically stop charging, in order to protect the stability of the phone battery, and does not suffer damage during charging.
It has two USB power output interfaces, one of which is a QC3.0 intelligent protocol interface (red), supporting 5V, 9V, 12V output, which can be used to quickly charge phones with ultra low power and ensure that the phone will not heat up; The other USB output interface is a standard 5V~2A output (black), which can be used for powering/charging other USB devices.（ It can be used for charging car DVRs, power banks, Bluetooth headsets, and more devices powered by USB.）
A hidden wireless charging switch that can control the opening and closing of the wireless charging function, designed for scenarios where continuous wireless charging is not applicable.(In case of extremely high temperature environment, direct sunlight on the phone may cause the phone to go black or shut down for protection due to continuous charging of the phone. In such cases, the wireless charging function can be temporarily disabled.）
The wireless charging indicator light makes the charging status clear at a glance. The blue indicator light is the wireless charging stop state, and the red indicator light is the charging state. The wireless charging function and indicator light can be completely turned off (controlled by the switch on the back of the device) by long pressing the switch.
The buckle locking device (off road mode) can ensure the security of the phone mounted. When the locking function is turned on, the phone will not fall off the bracket accidentally (this function is applicable to non-paved roads).
This product is designed to be compatible with a size of 4.2-6.5 inches (up to 7-inch phone can be loaded), and it can be adapted to most mobile phones without affecting the use due to accidental touch of the buttons on the edge of the phone.
All contact parts with the phone are made of soft rubber material, which has a certain highfrequency vibration filtering effect and maximum protection for the phone from damage.
The central opening design on the top makes it easier and faster to take and put the phone.
Wireless charging is still available as long as the phone case does not contain metal or metal substances.

Electrical Parameters

Input Voltage: DC 9~15V
Working voltage :DC 7.2V (charging working voltage)
Maximum working current:4A
Wireless Charging Output Power：15W
Wireless sensing distance: 6MM (can penetrate less than 3.5MM mobile phone case)
USB1 (up / black) output voltage: DC 5V
USB2 (down / orange) output voltage: DC 5V, 9V, 12V
Over-temperature protection temperature: +65°C

Product Illustration

正视图

1、Operating indicator light

2、Limit silicone

3、Wireless charging zone

4、Mobile phone holder

5、Lock switch

后视图

1、Install a card slot

2、Fixing nuts

3、Power Connectors

4、Waterproof rubber

5、 Switch button

侧视图

1、USB waterproof cover

2、USB1 / Standard 5V ~ 2A Output

3、USB2 / QC3.0 Output (Supported 5V \ 9V \ 12V)

Instructions for Use

Place/remove the phone

Suggest the following steps to place the phone ：

①Place the phone horizontally, hold the upper edge with one hand；

②Place the bottom edge of your mobile phone onto the active latch component；

③Push the phone downwards, causing the active part to move down. When the bottom edge of the phone is lower than the top edge of the charging device, push the phone backwards so that the top edge of the phone is inserted into the slot on the top of the charging device.

The following steps are suggested to remove your mobile phone：

①Pinch the upper edge of the phone from the top center

②Press down the phone and pull forward to detach the upper edge of the phone from the charging device

③Take the phone off

Note: The upper edge of the mobile phone bracket and the edge rubber of the buckle position are designed to fit most mobile phones, so that it will not affect the use by inadvertently pressing the buttons on the edge of the mobile phone when clamping the mobile phone,If the above situation occurs when using this product, please check whether the mobile phone is fully placed or turn the direction of the mobile phone to observe the placement condition. If the phone button is still inadvertently touched, please contact a TOMISHIRO distributor for more solutions.

About Lights

Blue light: indicates that wireless charging is turned on, but not in wireless charging status
Red light: indicates wireless charging is in progress
Lights off: indicates that the wireless charging function has been turned off
The alternating lights mean that the wireless charging protocol is pairing.

Note:

On some models, the light on the wireless charger stay lit for 60 seconds after the engine is turned off. This is the function of the vehicle ACC power control delay. When the ACC power is stopped, the power supply to the wireless charger is cut off and the light turns off accordingly.

Wireless Charging / Switch Control

Before using wireless charging, please make sure your vehicle is powered (key door open), and the blue light at the top of the wireless charging device is lit.
When a phone with wireless charging capability is placed on a wireless charging device, the blue light automatically changes to red, indicating that wireless charging is in progress, and the phone will display that charging is in progress.
Note: If the blue and red lights of some mobile phone models alternate flashing, it indicates that the mobile phone and the wireless charging device are in the process of establishing a charging protocol, and after several times, the red light will remain lit to maintain normal charging.
When the mobile phone is fully charged (mobile phone is at 100% battery), wireless charging will stop automatically and the indicator light will switch from red to blue.
In wireless charging mode, if you want to turn off/on the wireless charging function, press the switch button on the back of the device once. At this point, the light will change to blue, indicating that the wireless charging has been turned off and the phone's charging will stop simultaneously. If you need to turn the wireless charging function back on, press the switch button on the back of the device again and the light will change to red, and your phone's charging will start again simultaneously.
To completely turn off the wireless charging and lights, press and hold the switch button on the back of the device for 2 seconds. At this time, the wireless charging function is turned off, and the lights are also turned off.
Note: Regardless of whether the wireless charging device is turned on or off and the light is on or off, when the vehicle power is cut off and restored, the wireless charging device will be restored to the initial standby state (wireless charging on, blue light on).

USB Output Interface

This device provides two USB output ports that can be used simultaneously without being affected by wireless charging; the USB interface is not controlled by the rear switch, and the USB interface can still provide power supply function even in the state of complete wireless charging shutdown.
The USB interface (black) above is a standard 5V, 2A DC output. This interface provides a stable power output for any 5V power device, such as charging mobile batteries, Bluetooth headsets, and powering driving recorders.
The USB interface (orange) below is a high-efficiency QC3.0 protocol output interface. This interface provides 5V, 9V, 12V output voltage, in addition to power/charging for any 5V device, it also has the characteristics of high-speed charging, which can be used to quickly restore the low power of the mobile phone.

Note: USB1/USB2 port/wireless charging functions can be used at the same time. In the case of all outputs being used at the same time, in order to ensure the performance of wireless charging, the output current of the other two USB ports will be limited, and the charging performance of the USB ports will be reduced, but this will not affect the normal use of the electrical devices.

Safety Lockout Devices

This product is equipped with a safety lock-out device, which is designed to securely lock the mobile phone activity buckle to ensure that the mobile phone will not drop due to external force.

Position the handle on the bottom of the bracket to the left to lock it.
To unlock the bracket, place the handle at the right position.

To ensure reliable locking, when placing the mobile phone, a greater force needs to be applied when locking the handle (the force is smaller when the mobile phone is not placed), which meets the design requirements. This force acts on the movable parts without affecting the mobile phone.

（Non-locking mode can be used for mobile phone driving, which is usually used for pavement laying or for vehicles with less engine vibration, but it does not exclude the possibility of the mobile phone falling off due to sudden bumping or other external forces. It is recommended that all vehicle models put the locking device in the locking state when carrying a mobile phone, otherwise, unexpected bumping on the road such as speed bumps will cause mobile phone dropping.）

Exception Handling

Blue light flashing intermittently.

Please remove the wireless charging device from the power adapter, check the connection pins of the power adapter/original factory power adapter for any damage/wear and tear, use alcohol to wipe the four connecting pins on the top of the power adapter to remove dirt or oxides, and then re-install the wireless charging device to try again; If the connection pins are found to be worn, it is recommended to replace the new power adapter or contact the TOMISHIRO dealer for repair service.

The blue light stays on but the phone does not charge.

Please confirm if your phone is compatible with wireless charging.
Please check if there are any metal substances on the back of the phone, including metal finger rings, metal magnetic absorption (excluding Apple built-in), lens edge hot gold decoration, and phone cases with metal substances; check if the thickness of the phone case is more than 3.5MM.
Please check if the vehicle battery is losing power, and it is recommended to charge the vehicle after starting it.。

The red and blue lights flash alternately, and the mobile phone won't charge.

Please check if the mobile phone is placed in the center position as close as possible to the wireless charging device.
Please check if there is any abnormality in the mobile phone shell, such as special/metal material and thickness more than 3.5MM, please try wireless charging after removing the phone shell, confirm that wireless charging is normal and then install the phone shell for testing again. If the problem cannot be solved after removing the phone shell, please submit for after-sales processing.

Register and book after-sales service‍‍
‍

Precautions for Installation and Use

Do not install the product upside down, and the gaps between movable components and locking devices may cause water to accumulate inside the product.
When using the installation method of rear mounting fixing bolts, the screw torque should not be excessive, otherwise it will pull and damage the product backplate or even deform.
This product has a double-layer waterproof design inside and outside, which can effectively deal with daily rains, car washes and other usage scenarios. However, when washing the car, make sure that the USB rubber plug is completely closed; When the USB device is connected, the use of high pressure water gun will cause possible water ingress.
The surface of the product’s internal circuit has waterproof treatment, which can avoid the effect of condensed water vapor caused by temperature difference on the circuit. If other devices are connected to the USB interface, there is a possibility of water inlet through the USB port due to the plugging connection plug and continuous rain. Under this environment, it is recommended to select to cover the USB cover according to the actual situation to prevent the possibility of water inlet.
The design/manufacture of this product is waterproof to IP65 level, which means that it cannot be immersed in water.
The surface of the product has a special coating treatment. Clean with clean water or clean wax to wipe, please do not use alcohol or corrosive solvents for cleaning.
The USB output port of this product is designed for 5V device charging/power supply, please do not modify it to connect high power devices for power supply.

更多产品详情可访问：h ttp://www.tomishiro.com.cn进行了解

*用户须知

1、请勿在行车时操作手机以及Tomishiro产品，这可能会给您带来危及人身安全的隐患，造成人员伤亡等事故。

2、在使用产品时请确保已经将所有活动部件妥善安置并固定，并确保产品正确安装牢固。

3、在使用TOMI系列产品时，行车前请确保手机已经正确卡入槽位后再行驶，行驶过程中注意由于坑洼道路的剧烈颠簸、高速行驶的风阻对抗等原因可能会造成手机脱落的风险。

4、 Tomishiro产品系列活动部件拉动时不可过度用力，过度拉动或旋转或错误使用可能会导致产品变形或损坏。

5、如发现产品有螺丝松动、橡胶脱落、活动部件裂痕松动等一切影响产品正常使用情形请不要继续使用产品，请尽快与Tomishiro或合作服务商联系维修。

6、 Tomishiro产品质保包含电路功能的质量、产品结构功能的质量。耗材类产品、赠品在交付用户时确保质量完好可用，但不承担质保服务。（耗材类产品具体包括：橡胶垫、USB口盖；赠品包括：车贴、粘贴类部件产品、充电线缆等）

7、 Tomishiro产品系列包含但不仅限于TOMI3-W/L及其套装和相关配件产品及后续升级和迭代产品系列，如涉及用户自行安装，请务必参阅官方建议（书面说明或视频等）在安装时注意固定螺丝等部件拧紧到位；涉及电路布线、连接器件所采用的材料、配件、技术规范等须确保参照符合相应的技术标准范围内。

8、 Tomishiro产品系列因使用场景的特殊性，车辆行驶、清洗、养护时可能遇到各种情况，这一切都会造成安装部件的松动、脱落等等，请务必定期在每次行车前查看、定期（建议每月）养护产品设备，以保证设备正常使用。

9、请在洗车时确认Tomishiro产品的防水部件（USB防水塞等）均已入位扣好，否则可能导致产品损坏。

10、 Tomishiro产品系列涉及与汽车或摩托车相关，属户外运动、交通运输等高风险类，请妥善安装和使用该产品，以最大程度避免人身伤害和财产损失。

11、 Tomishiro产品提供自购买之日起一年的免费质保服务，质保服务包括维修、更换等形式，质保服务针对产品自身质量而影响正常功能使用的情形，但不包含因人为损坏、使用不当或外界因素造成的损坏。

*免责声明

*以下所描述的“产品”特指Tomishiro产品；

*以下所描述的“我方”特指售卖商、代理商及生产制造商；

*您在使用Tomishiro产品时则视为已知并接受以下免责声明。

1、在您知晓《用户须知》并正确使用我方产品的前提下我方只针对产品本身质量问题负责，对使用本产品过程中非因产品本身质量问题产生的其他一切损失我方不予以负责。

2、由于在行车中操作产品而造成的事故以及人身伤亡或经济损失等我方不予以承担责任。

3、由于未正确合理安装产品、安装时未紧固产品固定螺栓等原因导致的财产损失我方不予以承担责任。

4、用户自行拆卸产品以及自行维修本产品所造成的产品损坏或其他损失我方不予以承担保修责任以及其他责任。

5、由于用户自行改变产品结构、改装、超范围使用、超越最大技术参数负载使用、擅自修改连接电路等情形造成的财物损失我方不予以承担责任。

6、在使用TOMI系列产品时未正确放置手机或未确保手机牢靠卡入槽位的情况下行车时造成手机跌落的损失我方不予以承担责任。

7、在使用TOMI系列产品时由于剧烈颠簸或者车辆飞跃等情形导致手机跌落造成的损失我方不予以承担责任

8、由于受外力因素以及未正确使用产品时（用于非搭载手机使用的情形等）导致的产品损坏我方不予以承担保修责任和其他损失。

9、未在使用产品前确认产品部件的良好状态仍然使用产品所造成的人身及财产损失我方不予以承担责任。

*Tomishiro保留对该免责条款的最终解释权

TOMISHIRO（China）